SmartLine


SENSORS FOR MANY APPLICATIONS

wide range of applications
well thought out device design makes it easy to use in many applications
environmental monitoring
accurate and high quality sensors provide reliable measurements
simple installation
the use of built-in magnets greatly simplifies assembly

SMART SENSOR ISM

 

The use of wireless sensors makes the system extremely flexible during installation and also enables seamless reconfiguration in later time. With its easy scalability, systemONE can be installed in facilities with a capacity of single point of measurement up to several hundred measurements points.

The systemONE is designed to grow with client's infrastructure. Adding the next devices to system is uninterruptible and requires no additional configuration. Non-invasive and easy installation makes that the systemONE can be installed in already running objects without the need to perform any additional investment in existing infrastructure and the implementation time has been reduced to a minimum.

Power:

battery - AA 1.5V/3.6V, battery life up to 2 years
USB power supply 5V

smart sensor ISM

smart sensor eth

SMART SENSOR ETH

 

Remote locations, ie. the small server rooms or network access points in branch offices are usually not equipped with a redundant infrastructure that cares about the reliable operation of the IT equipment, hence monitoring of environment is very important.

Devices installed in such places often do not fulfill the critical role in IT infrastructure but provide eg. network services for end-users. Interruption in the operation of these devices due to failure eg. an air conditioning, can therefore lead to a break in the work of the whole department or location, which has a measurable effect in terms of financial losses.

For monitoring remote locations we designed ethernet mote devices. This products has the ability to work both in configuration with other devices from mote devices which are supported by the systemONE gateway, as well as in standalone configuration.

The ability to power this devices using PoE technology greatly facilitates the installation process, and the built-in web server allows fast and flexible configuration of the device. Ethernet mote products can also operate in standalone mode, making it possible to implement a monitoring system in a single location. Ethernet mote devices can alert by via email or by sending an sms.

Power:

802.3af PoE power
48V passive PoE


SMART-LOGGER

 

SMART-LOGGER software turns your device into a fully functional standalone data logger, which enables you to collect, store, and display measurement data collected over many years. The device allows to send immediate alarms via sms and email. It is possible to send recurring reports with current measurements and historical data.

In addition, devices with smart-logger firmware can be grouped into workgroup where one device works as a supervisor and collects measurement data from other devices, enables them to be displayed on a single panel and sends reports as one concatenated information message to the specified email address.

sensor logger minidisplay

SMART-LOGGER screenshot

SMART-MOTE

 

With the full integration of Astozi solutions, you can get results that can not be offered with third-party solutions. SystemONE transmits information about thresholds settings to sensors, so devices can show alarms to users via LEDs and built-in buzzer.


 

SMART-INTEGRATION-KIT

 

The SMART-INTEGRATION-KIT line is dedicated to devices that work with external systems such as IT systems and industrial systems. Thanks to the implementation of many well-known and popular protocols, it is possible to read measurement data from astozi sensors and transfer them to existing systems. In addition to the readout of measurement data, it is possible to control the LED diode and buzzer so that various notification scenarios can be implemented using astozi sensor and external software.

PROTOCOLS

HTTP, CSV, SNMP, MODBUS/TCP

SYSTEMS AND TOOLS

Nagios, PRTG, Cacti, OpenNMS, Zabbix, OpsView, Axence nVision, PowerShell, Bash

 
 
 


 
 
 

SMART sensor mqtt screenshot

SMART-IOT-KIT

 

The SMART-IOT-KIT line is dedicated to devices that work with external Internet of Things and Industrial Internet of Things systems. Thanks to the implementation of many well-known and popular protocols, it is possible to read measurement data from astozi sensors and transfer them to existing systems. In addition to the readout of measurement data, it is possible to control the LED diode and buzzer so that various notification scenarios can be implemented using astozi sensor and external software.

PROTOCOLS

HTTP, MQTT, CoAP

SYSTEMS AND TOOLS

Mosquitto, libcoap


 

Ask us for more.

Please fill out this form.

A Astozi or our Partner Representative will contact you regarding your interest in astozi solutions. 

*
*
astozi logo